Double cyclisation of phenylglycine-o-carboxylic acids—I: New stable mesoionic oxazolones

Remarkably stable mesoionic oxazolones possessing an oxazolo[3,2-a]quinolinium structure (5a–b),8,16, 17) were obtained by the double cyclisation of phenylglycine-o-carboxylic acids (3a–c) in refluxing acetic anhydride or in benzoic anhydride at 140°, The 0-Ac group was eliminated to give the corresponding lactones (6a–b) or replaced by O-Ts (7). IR stretching vibrations of the endo-carbonyl were in the range 1710–1768 cm^?1, while v_1-CH exhibited unusually high values (3159–3194 cm^-1). 1-Acyl derivatives could be obtained only with TFAA (23–24), although easy deuteration of the same position took place in the presence of traces of trifluoroacetic acid. Hydrolysis of 5b led to the α-quinolone-N-acetic acid 27a. In the case of 5a, hydrolysis was accompanied by self-acylation of the nucleophilic site at C-4 with formation of a dimeric acid 28a. The presence of an additional Me group in phenylalanine-o-carboxylic acid (36) activates the corresponding mesoionic oxazolone 37 so that 1-acylation becomes possible with formation of the fused oxazole 38 by the Dakin-West reaction. Temperature dependent magnetic non-equivalence of methylene protons has been observed in acids 3b-d and f and also in the 7-membered anhydride 48b.     

Calibration model of simultaneous multielement atomic-emission analysis using analytical line groups of each determined element

A calibration model of multielement methods for simultaneous determination of micro- and macro-concentrations of elements by computing the arc atomic-emission spectra has been developed. A calibration procedure for the analytical line group of the elements to be determined is offered. It allows the lower and upper limits of the concentration range for each line of the determined element to be calculated by means of the least-square method (LSM) and the Weibull distribution law is used to extend the concentration region. The calibration model was successfully tested for different arc optical emission spectroscopy (OES) methods. Received: 17 June 1997 / Revised: 3 November 1997 / Accepted: 7 November 1997     

Development and optimization of a solid composite tyrosinase biosensor for phenol detection in flow injection systems

Bulk-modified epoxy-graphite tyrosinase biosensors were fabricated by four different procedures. The influence of these fabrication procedures on the analytical performance of the enzyme electrode in an amperometric wall-jet flow cell has been studied. The bioprobe performance is assessed by cyclic voltammetry. Higher current densities and narrower peaks were obtained when the enzyme was introduced in the dry state into the epoxy-graphite material, instead of introducing it previously dissolved in the buffer. In the F1 system responses of 11.79 μA cm⁻² and 1.43 μA cm⁻² are then obtained for catechol and phenol respectively for 50 μL injections of 20 μM solutions. Moreover, if gold/palladium is introduced into the epoxy-graphite, a further increase in current is achieved resulting in 27.70μA cm⁻² and 4.90μA cm⁻²for catechol and phenol, respectively. This biosensor can operate in aqueous as well as in mixed aqueous-organic environments.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

Palladium-arene interactions in catalytic intermediates: an experimental and theoretical investigation of the soft rearrangement between eta1 and eta2 coordination modes

A series of dichloro-bridged arylbicycloheptylpalladium complexes have been synthesized and characterized by means of NMR spectroscopy. The compound [(C16H19)PdCl]2*CH2Cl2 with ortho and para methyl substituents at the arene has been characterized by means of X-ray diffraction techniques. The C(ipso) atom of the arene lies almost at the fourth planar coordination site of the metal [Pd-C(ipso) = 2.22(1) A (average)], and due to the arene's tilting, the substituted C(ortho) atom is relatively close to the metal atom [2.54(1) A (average)]. The coordinated C(ipso)-C(ortho) linkage, in a seemingly dihapto coordination, is anti with respect to the CH2 bridge of the bicycloheptyl unit. Variable-temperature NMR experiments for the para-substituted dimer 9 reveal restricted rotation of the two aryl groups about the corresponding C-C(ipso) bonds (DeltaE < or =17 kcal x mol(-1)). DFT-B3LYP calculations have been carried out on the known and similar monomer (phenylbicycloheptenyl)Pd(PPh3)I (4) and its related substituted derivatives. The essential results are as follows: (i) The potential energy surface for twisting the phenyl ring away from the symmetric eta(1) coordination in 4 is very flat (DeltaE < or = 1 kcal x mol(-1)) whereas an Atoms in Molecules analysis excludes the existence of an actual Pd-C(ortho) bond in the seemingly eta2-type conformer. (ii) Complete rotation of the unsubstituted phenyl ring is not facile but feasible. A significant strain affects the transition-state structure featuring a Pd-HC(aryl) agostic-type bond. The calculated destabilization of 10.3 kcal x mol(-1), with respect to the ground state, can be compared to the experimental barrier of the dimer 9. (iii) Various methyl-substituted derivatives of 4 have been optimized, and their structural and energetic trends are discussed. An almost ideal eta1 coordination is shown by the anti conformer of the C(ortho)-substituted complex due steric effects. For all of the other cases, a slipped eta2 coordination may be described. As a general conclusion, the unsaturated metal center receives pi electron density of the arene mainly through its C(ipso) atom. The effect may be slightly improved if the C(ortho) atom also gets closer to the metal, but in no case, does the slipped eta2 coordination seem to be crucial for the stability of the system.     

Revealing structural effects: electrochemical reactions of butanols on platinum

Spectroelectrochemical studies on the reactivity of butanol isomers on Pt electrodes in perchloric acid medium led to the observation of structural effects that result from the different arrangements of atoms in the organic molecules. The use of differential electrochemical mass spectrometry (DEMS) to detect volatile products showed that all four isomers react on the electrode, though different product yields were observed for each compound. In spite of the differences in the electrochemical behaviour of the butanol isomers, a series of general processes accounts for the results obtained. The formation of strongly adsorbed residues by a dehydration process leading to the formation of a C=C bond was proposed for all isomers. Electroreduction of the adsorbates produces C(4) and C(3) alkanes, and the latter reveal the existence of a fragmentation process. The C(4) hydrocarbons can be formed by hydrogenation of these residues and by hydrogenolysis of alcohol molecules in the bulk solution which react at the electrode with adsorbed hydrogen. On the other hand, CO(2) is formed during electrooxidation of the adsorbed species. Partial-oxidation products containing a carbonyl group were detected from 0.2 M solutions of 1-butanol, isobutyl alcohol and sec-butyl alcohol. The tertiary alcohol tert-butyl alcohol only reacts in its adsorbed state.     

Oxygen activation on metallic centers and oxidizing abilities of such oxygen

It was shown that metallcontaining peroxides such as XOOOBu-t [X = (t-BuO)₂Al, (t-BuO)₃Ti] generate molecular oxygen in the electron-excited singlet state (¹O₂). These ozonides and η²-peroxocomplex Ph₃Bi(η²O₂) demonstrate high oxidative activity towards some classes of organic substances under mild conditions (20 °C).     

Addition of secondary phosphines to N-vinylpyrroles

Secondary phosphines 1-3 react readily with N-vinylpyrroles 4 and 5 under radical initiation to give regiospecifically anti-Markovnikov adducts, diorganyl-2-(1-pyrrolyl)ethylphosphines 6a-d, highly reactive building blocks for organic synthesis, in 88-91% yields.     

Fluoropolyethers end‐capped by polar functional groups. III. Kinetics of the reactions of hydroxy‐terminated fluoropolyethers and model fluorinated alcohols with cyclohexyl isocyanate catalyzed by organotin compounds

The kinetics of the dibutyltin dilaurate (DBTDL)‐catalyzed urethane formation reactions of cyclohexyl isocyanate (CHI) with model monofunctional fluorinated alcohols and fluoropolyether diol Z‐DOL H‐1000 of various molecular weights (100–1084 g mol^?1) in different solvents were studied. IR spectroscopy and chemical titration methods were used for measuring the rate of the total NCO disappearance at 30–60 °C. The effects of the reagents and DBTDL catalyst concentrations, the solvent and hydroxyl‐containing compound nature, and the temperature on the reaction rate and mechanism were investigated. Depending on the initial reagent concentration and solvent, the reactions could be well described by zero‐order, first‐order, second‐order, or more complex equations. The reaction mechanism, including the formation of intermediate ternary or binary complexes of reagents with the tin catalyst, could vary with the concentration and solvent and even during the reaction. The results were treated with a rate expression analogous to those used for enzymatic reactions. Under the explored conditions, the rate of the uncatalyzed reaction of fluorinated alcohols with CHI was negligible. Moreover, there was no allophanate formation, nor were there other side reactions, catalysis by urethane in the absence of DBTDL, or a synergetic effect in the presence of the tin catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3771–3795, 2002     

NMR and X-ray crystallography, complementary tools in structural proteomics of small proteins

NMR spectroscopy and X-ray crystallography, the two primary experimental methods for protein structure determination at high resolution, have different advantages and disadvantages in terms of sample preparation and data collection and analysis. It is therefore of interest to assess their complementarity when applied to small proteins. Structural genomics/proteomics projects provide an ideal opportunity to make such comparisons as they generate data in a systematic manner for large enough numbers of proteins to allow firm conclusions to be drawn. Here we report a comparison for 263 unique proteins screened by both NMR spectroscopy and X-ray crystallography in our structural proteomics pipeline. Only 21 targets (8%) were deemed amenable to both methods based on an initial 2D 15N-HSQC NMR spectrum and optimized crystallization trials. However, the use of both methods in the pipeline increased the total number of targets amenable to structure determination to 107, with 43 amenable to NMR only and 43 amenable to X-ray crystallographic methods only. We did not observe a correlation between 15N-HSQC spectral quality and the success of the same protein in crystallization screens. Similar results were found for an independent set of 159 proteins as reported in the accompanying paper by Snyder et al. Thus, we conclude that both methods are highly complementary, and in order to increase the number of proteins suited for structure determination, we suggest that both methods be used in parallel in screening of all small proteins for structure determination.